No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-1110019 AS Jetty Consume Memory Overlimit

ALM-1110019 AS Jetty Consume Memory Overlimit

Description

This alarm is generated when the memory usage of a schedule process exceeds the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

1110019

Major

Yes

Parameters

Parameter

Description

Alarm Name

Alarm name.

Source System

Name of the source system where the alarm is generated.

IP Address

IP address of the ECS where the alarm is generated.

Last Occurred At

Time when the alarm was generated for the last time.

Additional Information

Supplementary information about the alarm.

Impact on the System

The service processes cannot run properly.

Possible Causes

The service load increases or node system encounters an exception.

Procedure

  1. Log in to ManageOne Maintenance Portal using a browser.

    • URL: https://Address for accessing the homepage of ManageOne Maintenance Portal:31943, for example, https://oc.type.com:31943
    • Default username: admin; default password: Huawei12#$

  2. On the menu bar in the upper part of the page, choose Alarms > Current Alarms.
  3. In the alarm list, locate the alarm to be handled, and click on the left of the alarm. The Details page is displayed.
  4. Choose Location Info, obtain the host IP address, that is, the IP address of the node where the alarm is generated.
  5. Use PuTTY to log in to the VM identified in 4.

    Default username: admin; default password: IaaS@OS-CLOUD9!

  6. Run the following command and enter the password of the root user to switch to the root user:

    sudo su - root

    The default password of the root user is Cloud12#$.

  7. Run the following command to disable PuTTY logout upon timeout:

    TMOUT=0

  8. Run the following command to restart the process:

    sh /opt/autoscaling/autoscaling-schedule/bin/schedule.sh restart

    If the following information is displayed, the jetty process is restarted successfully:

    stop schedule succeed.
    start schedule succeed.

  9. Check the memory usage.

    • If the memory usage occasionally reaches the threshold, continue to observe the memory usage.
    • If the memory usage is consistently high without traffic spikes, contact technical support to check whether memory leakage occurs.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 33952

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next