No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-1110036 Gaussdb Switchover Failed

ALM-1110036 Gaussdb Switchover Failed

Alarm Description

This alarm is generated when the active and standby database nodes are switched over.

The alarm is automatically cleared one minute later.

Alarm Attribute

Alarm ID

Alarm Severity

Alarm Type

1110036

Critical

Yes

Parameters

Parameter

Description

Alarm Name

Alarm name.

Source System

Name of the source system where the alarm is generated.

IP Address

IP address of the ECS where the alarm is generated.

Last Occurred At

Time when the alarm was generated for the last time.

Additional Information

Supplementary information about the alarm.

Impact on the System

None

Possible Cause

The active and standby database nodes are switched over.

Procedure

No manual operation is required.

Reference

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 45072

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next