No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EVT-73202 Switchover Between Active and Standby Nodes

EVT-73202 Switchover Between Active and Standby Nodes

Description

This event is generated when an active/standby switchover occurs for a service.

Attribute

ID

Level

Auto Clear

73202

Warning

No

Parameters

Name

Meaning

Fault Location Info

  • service_name: specifies the name of the service for which the event is generated.
  • host_id: specifies the ID of the host for which the event is generated.

Additional Info

  • host_id: specifies the ID of the host for which the event is generated.
  • Hostname: specifies the name of the host where the event is generated.

Impact on the System

This event only records that the standby service changes to the active state. There is no impact on the system.

Possible Causes

  • The active service is faulty.
  • The active service is stopped by a maintenance command.
  • The host where the active service resides is faulty.

Procedure

This event informs the user of only switchover from the standby service to the active state. Generally, you need to manually clear the event. No extra operation is required.

NOTE:

If you need to locate the cause of the alarm, check whether ALM-6017 Faulty Host or ALM-73203 Component Fault is reported or whether the user manually triggers the command and stops the active service. If the problem persists, contact technical support for assistance.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 47086

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next