No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Command Execution Methods

Command Execution Methods


You have imported environment variables. For details, see section Importing Environment Variables.


When you execute the nova/cinder/cps command on the OpenStack controller node and do not expect the history mechanism of the OS to record this command, perform the operations in secure mode. Otherwise, perform the operations in insecure mode.

Secure Mode

  1. Run the following command to enter the secure operation mode:


    Information similar to the following is displayed:
    please choose environment variable which you want to import:
    (1) openstack environment variable (keystone v3)
    (2) cps environment variable
    (3) openstack environment variable legacy (keystone v2)
    please choose:[1|2|3]

    Enter 1 to select the keystone v3 authentication.

    Information similar to the following is displayed:

    Input command:

Insecure Mode

Exercise caution when performing operations in this mode because this mode poses the following risks:

  • The operation history mechanism records all the commands that have been executed.
  • The access password imported to the environment variables poses the risk of leaking the tenant's password.
  1. Perform the operations based on section Importing Environment Variables and run the following command to import OS_PASSWORD to the OS:

    export OS_PASSWORD=123


    In the command, 123 indicates the tenant's access password.

Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 64407

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next