No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-70087 The Default Certificate Used Alert

ALM-70087 The Default Certificate Used Alert


FusionSphere OpenStack checks component certificates in the system each day by default. This alarm is generated when FusionSphere OpenStack detects that a component uses the Huawei default certificate.


Alarm ID

Alarm Severity

Auto Clear







Fault Location Info

Specifies the name of the component that reports the alarm.

Additional Info

detail_info: provides detailed information about the alarm, for example, Service certificate [and root certificate][is][are] default.

Impact on the System

Use Huawei default certificates only for site deployment and commissioning. When the system is commercially used, the Huawei default certificate must be replaced with the site certificate, and Huawei does not take any security risks brought by using the Huawei default certificate.

Possible Causes

The component uses the Huawei default certificate.


  1. In Fault Location Info, obtain the component name and confirm the component that generates the alarm.
  2. Use the site certificate to replace the certificate of the component for which the alarm is generated.

    For keystone_pki: Replace the certificate based on "Replacing a Single or Multiple Certificates at a Time on ManageOne" in HUAWEI CLOUD Stack 6.5.0 Security Management Guide.

  3. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, contact technical support for assistance.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 47763

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next