No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x2010E01A0008 Corrupted Blocks In Backup Image Detected

0x2010E01A0008 Corrupted Blocks In Backup Image Detected


When job (ID: [Task_id]) of verifying backup image (ID: [Snap_id], creation time: [Create_time]) which was generated from protected object (name: [Machine_name], UUID: [Machine_UUID]) is being executed, corrupted blocks in the backup image are detected.


Alarm ID

Alarm Level

Manually Cleared








Backup image ID


Time when a backup image is created


Protected object name


Protected object UUID


Task ID

Impact on the System

The next backup job based on this backup image will be a full backup job.

Possible Causes

  • The storage unit is inaccessible.
  • Some blocks in the backup image are corrupted.


  1. Possible cause 1: The storage unit is inaccessible.

    1. On the current alarm page, check whether the alarm whose ID is 0x10E00E0000 (Storage Unit Disconnected) or 0x10E00E0001 (Storage Unit Inaccessible) is reported.
      • If yes, handle the alarm described in 1.a to ensure that the storage unit is accessible.
      • If no, 2.

  2. Possible cause 2: Some blocks in the backup image are corrupted.

    1. Log in to the backup server GUI using a browser.

      Login address: https://IP address corresponding to the datamover_management_float_ip field:8088

      Default account: admin. Default password: Cloud12#$ for installation using HUAWEI CLOUD Stack Deploy, and PXU9@ctuNov17! for manual installation.

    2. Choose Restore > All Backup Images on the home page and search for the current backup image and backup plan name based on the backup image ID and generation time.
    3. Delete the backup image.
    4. Choose Backup > Backup Plan to run the backup plan obtained in 2.b to avoid data loss.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 49292

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next