No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-2001101 lvs_keepalived_process_not_exists

ALM-2001101 lvs_keepalived_process_not_exists


A floating IP address is bound to the LVS node through Keepalived. This alarm is generated when the Keepalived process is not running, indicating system faults or risks.


Alarm ID

Alarm Severity

Auto Clear







Resource name

Name of the device for which the alarm is generated

Resource type


Monitor type

Service monitoring

Host IP address

IP address of the host


Data in recent periods


Threshold for generating an alarm

Impact on the System

An exception occurs when you access the console of a service.

Possible Causes

The Keepalived process has stopped.


  1. Log in to ManageOne Maintenance Portal using a browser.

    • URL: https://Address for accessing the homepage of ManageOne Maintenance Portal:31943, for example,
    • Default username: admin; default password: Huawei12#$

  2. On the menu bar in the upper part of the page, choose Alarms > Current Alarms.
  3. In the alarm list, locate the alarm to be handled, and click on the left of the alarm. The Details page is displayed.
  4. Choose Location Info, obtain the host IP address, that is, the IP address of the node where the alarm is generated.
  5. Use PuTTY to log in to the VM identified in 4.

    The default username is ulb. The default password is cnp200@HW.

  6. Run the following command to disable user logout upon system timeout:


  7. Run the following command to switch to user root:

    sudo su - root

    The default username is root. The default password is Cloud12#$.

  8. Run the following command to restart the Keepalived process, and check whether the alarm persists:

    service keepalived restart

    • If yes, contact technical support for assistance.
    • If no, no further action is required.



Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 45001

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next