No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-MOBackupService_100002 No Backup Server Is Configured

ALM-MOBackupService_100002 No Backup Server Is Configured

Alarm Description

This alarm is generated when a delivered backup task fails to obtain backup server parameters.

Alarm Attribute

Alarm ID

Alarm Severity

Alarm Type



Operation alarm

Alarm Parameters



Backup Server Type

The backup server type is SFTP.

Impact on System

The backup task fails to be executed.

Possible Causes

  • The backup server parameters are not configured.

Handling Procedure

  1. On ManageOne Maintenance Portal, choose System > Backup and Restoration from the main menu. In the navigation pane, choose Backup Policy to check whether a backup server is configured.

    • If yes, go to 5.
    • If no, check the configuration of the backup server by referring to Preparing the SFTP Server.

  2. Choose Backup Policy. If the transmission protocol of Basic Data is not the type provided in the alarm parameters, change the transmission protocol of Basic Data to the type provided in the alarm parameters.
  3. Select Basic Data and click Immediate backup.
  4. In the task list, wait until the backup task is complete and check whether the task is successfully executed.

    • If yes, no further action is required.
    • If no, go to 5.

  5. Collect the alarm handling information and contact technical support for assistance.

Alarm Clearance

This alarm will be automatically cleared after the fault is rectified.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 47988

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next