No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x6000760001 The HA Certificate Has Expired

0x6000760001 The HA Certificate Has Expired

Description

The HA certificate on eBackup server (IP address: [NodeIP]) has expired.

Attribute

Alarm ID

Alarm Level

Manually Cleared

0x6000760001

Warning

No

Parameters

Name

Meaning

NodeIP

The IP address of eBackup server.

Impact on the System

The HA function has security risks.

Possible Causes

The HA certificate has expired.

Procedure

  1. Possible cause 1: The HA certificate has expired.

    1. Contact the administrator to obtain a valid HA certificate file.
    2. Log in to the backup manager or backup server GUI using a browser.

      Login address: https://IP address corresponding to the Workflow-Management-Float-IP field or IP address corresponding to the datamover_management_float_ip field:8088

      Default account: admin. Default password: Cloud12#$ for installation using HUAWEI CLOUD Stack Deploy, and PXU9@ctuNov17! for manual installation.

    3. Choose Monitor > Server. On the Server page, check the IP addresses of the backup management plane of the HA active node whose role is Backup server (primary)(or Backup Manager server (primary)) and HA standby node whose role is Backup server (standby)(or Backup Manager server (standby)).
    4. Log in to the active and standby HA nodes.

      Default account: hcp. Default password: PXU9@ctuNov17!.

    5. Run the su root command. Enter the password of user root to switch to the root account.
    6. Run the mv /opt/huawei-data-protection/ebackup/ha/local/cert/cacert.pem /opt/huawei-data-protection/ebackup/ha/local/cert/cacert.pem.bak and mv /opt/huawei-data-protection/ebackup/ha/local/cert/server.pem /opt/huawei-data-protection/ebackup/ha/local/cert/server.pem.bak commands to back up the original HA certificate file.
    7. Use WinSCP to copy the cacert.pem and server.pem files to the /home/hcp directory.

      Default account: hcp. Default password: PXU9@ctuNov17!.

    8. Run the mv /home/hcp/cacert.pem /opt/huawei-data-protection/ebackup/ha/local/cert/ and mv /home/hcp/server.pem /opt/huawei-data-protection/ebackup/ha/local/cert/ commands to move the certificate file to the HA certificate path.
    9. Run the chmod 400 /opt/huawei-data-protection/ebackup/ha/local/cert/cacert.pem and chmod 400 /opt/huawei-data-protection/ebackup/ha/local/cert/server.pem commands to set the permissions on the cacert.pem and server.pem files to 400.
    10. Run the chown hcpprocess /opt/huawei-data-protection/ebackup/ha/local/cert/cacert.pem and chown hcpprocess /opt/huawei-data-protection/ebackup/ha/local/cert/server.pem commands to change the owner of cacert.pem and server.pem files to hcpprocess.
    11. Run the /opt/huawei-data-protection/ebackup/ha/module/hacom/script/stop_ha_process.sh command to restart the HA service.
    12. Wait for about 3 minutes and check whether the alarm is cleared on the current alarm page.
      • If yes, no further action is required.
      • If no, contact technical support engineers.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 47692

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next