No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EVT-70107 VM HA Triggered

EVT-70107 VM HA Triggered

Description

This event is generated when HA is triggered for a VM.

  • This event is cleared when the status of the VM is restored to the running or stopped state.
  • If HA cannot be complete due to resource insufficiency or VM affinity settings, this event cannot be automatically cleared. You can manually clear it or wait for the system to clear it later after troubleshooting the system.

Attribute

ID

Level

Auto Clear

70107

Major

Yes

Parameters

Name

Meaning

Fault Location Info

  • instance_id: specifies the ID of the VM for which the event is generated.
  • tenant_id: specifies the ID of the tenant accommodating the VM for which the event is generated.

Additional Info

  • availability_zone: specifies the name of the AZ where the VM for which the event is generated is located.
  • instance_name: specifies the name of the VM for which the event is generated.
  • hostname: specifies the name of the host accommodating the VM for which the event is generated.
  • host_id: specifies the ID of the host accommodating the VM for which the event is generated.

Impact on the System

The HA-triggered VM will be restarted on the current host or other available hosts.

Possible Causes

An exception (for example, a management plane failure or network disconnection) occurs on the host housing the VM.

Procedure

This event informs the user of HA operation of the VM. This event is automatically cleared when the VM is restored to the stable state (running or stopped).

NOTE:

If you need to locate the cause of the event, check whether the following fault is reported: ALM-6017 Faulty Host or ALM-6021 Host Network Port Fault. If the problem is not caused by the cause, contact technical support for assistance.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 44946

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next