No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-15015 APIServer Availability Failure

ALM-15015 APIServer Availability Failure

Alarm Description

This alarm is reported when the heartbeat detection of the APIServer service fails.

Attribute

Alarm ID

Alarm Severity

Alarm Type

15015

Major

Integrity violation

Alarm Parameters

Parameter

Description

Node

Specifies the node for which the alarm is reported.

CloudService

Specifies the service for which the alarm is generated.

Service

Specifies the service for which the alarm is generated.

MicroService

Specifies the microservice for which the alarm is generated.

NativeMeDn

Specifies the node for which the alarm is generated.

UserDefinedInfo

Specifies the customized alarm information.

solution

Specifies the method for handling the alarm:

Impact on the System

If the APIServer APIs are unavailable, external APIs provided by DMS cannot be used, queues and messages cannot be viewed and managed on the GUI, and external APIs provided by APIServer cannot be used.

Possible Causes

1. The network connection between the Manager service and the APIServer service is abnormal.

2. The APIServer service is not started properly.

3. The APIServer service process is running abnormally.

Procedure

  • The APIServer process is not properly started.

    APIServer depends on GaussDB and GlobalZK. Check whether GaussDB or GlobalZK works properly based on the log information.

  • The process is in the suspended state.

    Check whether the disk of the node where the APIServer service resides is full or whether the APIServer service is running properly.

    No manual intervention is required. After the upgrade or restart succeeds, the alarm is automatically cleared.

Alarm Clearing

This alarm will be automatically cleared after the fault is rectified.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 46542

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next