No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
/opt/paas/dockyard File System Is Damaged

/opt/paas/dockyard File System Is Damaged


/opt/paas/dockyard file system fails to be mounted, as shown in the following figure.

Run the following command in the system maintenance mode to query the file system status:


The command output shown in the following figure indicates that the vol_opt_paas_dockyard file system is damaged.

Possible Causes

The VM is abnormally powered off when services are running.

Troubleshooting Method

  1. When information shown in the following figure is displayed, enter the password of the root user to go to the maintenance mode.

  2. Run the following command to repair the damaged file system:

    fsck -y /dev/mapper/opt_vg-vol_opt_paas_dockyard

  3. Run the following command to restart the VM:


  4. If the fault persists, contact technical support for assistance.
Updated: 2019-06-01

Document ID: EDOC1100062375

Views: 1434

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next