No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Service Subscription Failure

Service Subscription Failure


A service user fails to subscribe to services.

Possible Causes

  • Backend stack resources failed to be created.
  • Health check failed.
  • Backend components are abnormal.

Troubleshooting Method

  1. Log in to FusionStage.

    1. Use a browser to log in to ManageOne Operation Portal (ManageOne Tenant Portal in B2B scenarios) as a VDC administrator or VDC operator.
      Login address:
      • Login address in a non-B2B scenario: https://Address for accessing ManageOne Operation Portal, for example,
      • Login address in the B2B scenario: https://Address for accessing ManageOne Tenant Portal, for example,
    2. Select your region and then project from the drop-down list on the top menu bar.
    3. Choose Console > Application > FusionStage from the main menu.

  2. Choose Marketplace > Service > My Order from the main menu.
  3. Click Operation Log under More in the lower right corner of the target service instance to check the type of the issue.
  4. For instance (created based on CSC) stack creation failures, on the Instance Details page of the instance, click the stack hyperlink to go to the stack page. Then perform the next step based on section Stack Troubleshooting.
  5. If the health check fails, contact support engineers for assistance.
  6. If backend components are abnormal, collect related logs and contact support engineers for assistance.
  7. Clear resources you created when the abnormality occurred, use services again, and check whether statuses of services or instances are normal.
Updated: 2019-06-01

Document ID: EDOC1100062375

Views: 1280

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next