No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the IP Address of the Upper-Level DNS Server of DNS-Internal

Changing the IP Address of the Upper-Level DNS Server of DNS-Internal

When HUAWEI CLOUD Stack Deploy is installed and deployed, the values of Customer or public network DNS service address 1 and Customer or public network DNS service address 2 in the LLD table are incorrect or the planning is changed. In this case, you need to modify the values.

Prerequisites

  • You have obtained the correct value of Customer or public network DNS service address 1.
  • You have obtained the correct value of Customer or public network DNS service address 2.

Procedure

  1. Enter http://DMK floating IP address:8443 in the address bar of the browser to log in to DMK.

    The default account is udns. The default password is cnp200@HW.

  2. In the navigation pane on the left, choose Deploy Guide.

    Figure 23-4 Deploy Guide

  3. On the Service Configuration page, click the Services tab and select DNS-Internal.

    Figure 23-5 Service Configuration

  4. Configure the following parameters:

    • Select Version: version of the installation package
    • Select Action: Upgrade DNS
    • Select Region: local
    • Host Repository: NO
    • Gray Deployment: NO

  5. Select DNS-Internal for Team and udns for Account.

  6. Modify the parameters in the configuration file.

    Click beside Configuration File. The Configuration File area and the Configuration File Template area are displayed. Change the value of forwarders_ips under tenant_config in the Configuration File area based on the live network conditions, as shown in Figure 23-6.

    Figure 23-6 Modifying the parameter value
    NOTE:

    The configuration in the preceding figure is used only as an example. Set the configuration file as required.

  7. Check the upgrade status.

    1. In the navigation pane on the left, choose Task Board.
    2. Locate the task and check the status before the task name. If the status changes to , the task is successful.
    3. Click Details in the Operation column to view details about the upgrade task.

Translation
Download
Updated: 2019-06-01

Document ID: EDOC1100062375

Views: 1397

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next