No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Firewall Comprehensive Configuration Examples

This document describes the application scenarios and configuration methods in typical projects of the firewall.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  1. Run the display hrp state command on FW_A and FW_B. The current HRP state is normal.
  2. Enterprise users on the Internet can access virtual machine services normally.
  3. Enterprise users on the Internet can access the Portal system normally.
  4. Run the shutdown command on GE1/0/1.10 of FW_A to simulate a link fault. The active/standby switchover is normal without services interrupted.
Updated: 2019-01-26

Document ID: EDOC1100062972

Views: 15866

Downloads: 694

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next