No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Firewall Comprehensive Configuration Examples

This document describes the application scenarios and configuration methods in typical projects of the firewall.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



  1. Run the display hrp state command on FW_A to view the current HRP state. The following information indicates that HRP is successfully set up.

    HRP_M[FW_A] display hrp state
     Role: active, peer: standby
     Running priority: 46002, peer: 46002
     Backup channel usage: 7%
     Stable time: 0 days, 0 hours, 12 minutes

  2. Different users on the intranet and mobile employees can access the Internet as planned.
  3. Run the shutdown command on GE1/0/1 of FW_A to simulate a link fault. The active/standby switchover is normal without services interrupted.
Updated: 2019-01-26

Document ID: EDOC1100062972

Views: 16458

Downloads: 708

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next