No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Firewall Comprehensive Configuration Examples

This document describes the application scenarios and configuration methods in typical projects of the firewall.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Conclusion and Suggestions

Conclusion and Suggestions

  1. This section describes the typical application of firewalls at the egress of an enterprise campus network to the Internet.
  2. The typical hot standby networking is introduced, where the firewall is connected to an upstream switch and a downstream router.
  3. This solution demonstrates the multi-ISP uplink selection capabilities of the firewall that serves as a gateway. Such capabilities include global intelligent uplink selection and PBR intelligent uplink selection.
  4. The solution also embodies the application identification and control functions of the firewall. The firewall can identify ports and various applications and is capable of access control, PBR, and traffic control based on the applications.
Updated: 2019-01-26

Document ID: EDOC1100062972

Views: 16559

Downloads: 712

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next