No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Command Reference

Command Reference

This section describes the meanings, parameters, and usage of the common commands of the hinicadm tool. For more information about the commands, you can run the -h command on the hinicadm.

On Microsoft Windows, you cannot double-click hinicadm.exe to use to the tool. The following describes how to use the commands on Microsoft Windows:
  1. Run cmd to open the command line interface (CLI), right-click the title bar and choose Properties from the menu, click the Layout tab, and set Width under Screen Buffer Size to 999 to ensure that the command output format is correct.
  2. Go to the tool installation directory, for example, C:\Program Files (x86)\hinicadm.
  3. Enter hinicadm.exe<major cmd> <minor cmd> <parameter> …<minor cmd> <parameter>.
Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 12076

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next