No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring a File Using the Virtual Directory

Transferring a File Using the Virtual Directory

Before installing and upgrading the driver, upgrading the firmware, and installing management tool, you need to transfer the corresponding file to the OS of the server.

The following describes how to transfer a file using the virtual directory function of the Virtual Remote Console.

  1. Log in to the real-time server desktop using the Remote Virtual Console.

    For details, see Logging In to the Real-Time Server Desktop.

  2. On the toolbar of the Remote Virtual Console, click .

    The virtual device list is displayed, as shown in Figure 9-5.

    Figure 9-5 Virtual device menu

  3. Select Directory and click Browse.
  4. Select the local path where the file is.
  5. Click Connect.
  6. Copy the file to the server OS.

    The device type and location of a virtual directory varies depending on the operating system type. For details, see the official website of each respective OS vendor.

Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 9096

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next