No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Server

Restarting the Server

You can use the iBMC to power off and then power on the server for the firmware upgrade to take effect.

Restarting the Server on the iBMC WebUI

  1. Log in to the iBMC WebUI.

    For details, see Logging In to the iBMC WebUI.

  2. In the navigation tree, choose Power > Power Control.

    The Power Control page is displayed, as shown in Figure 9-3.

    Figure 9-3 Power Control page

  3. Select Forced Power Cycle.
  4. Confirm the operation in the operation confirmation dialog box displayed.

Restarting the Server Through the Remote Virtual Console

  1. Log in to the real-time server desktop using the Remote Virtual Console.

    For details, see Logging In to the Real-Time Server Desktop.

  2. On the toolbar of the Remote Virtual Console, click .

    The power control menu is displayed, as shown in Figure 9-4.

    Figure 9-4 Power control menu

  3. Choose Forced Power Cycle.
  4. Confirm the operation in the operation confirmation dialog box displayed.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 11990

Downloads: 63

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next