No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Server BIOSs

Configuring the Server BIOSs

The following uses the BIOS of the 2288H V5 as an example to describe how to enable the SR-IOV function in the BIOS.

Set the server boot mode to the UEFI mode before performing this operation.

  1. Log in to the real-time server desktop using the Remote Virtual Console.

    For details, see Logging In to the Real-Time Server Desktop.

  2. Restart the server.
  3. The BIOS configuration screen is displayed.

    • If the BIOS version is V3XX or earlier, the message shown in Figure 4-1 is displayed.
      Figure 4-1 Startup information (1)
      Press F11 to access the BIOS screen, as shown in Figure 4-2. Go to 5.
      Figure 4-2 BIOS screen (1)
    • If the BIOS version is V6XX or later, the message shown in Figure 4-3 is displayed.
      Figure 4-3 Startup information (2)
      Press Delete to access the BIOS screen, as shown in Figure 4-4.
      Figure 4-4 BIOS screen (2)

  4. Use arrow keys to select BIOS Configuration in the lower right corner and press Enter. The Setup Utility configuration screen is displayed. Go to 6.
  5. Use arrow keys to select Setup Utility in the lower right corner and press Enter. The Setup Utility configuration screen is displayed.
  6. In the navigation area on the left, choose Advanced, as shown in Figure 4-5.

    Figure 4-5 Advanced screen

  7. Use arrow keys to select Peripheral Configuration and press Enter. The Peripheral Configuration configuration screen is displayed, as shown in Figure 4-6.

    Set PCIe SR-IOV to Enbled.

    Press Esc to return to the Advanced screen.

    Figure 4-6 Peripheral Configuration screen

  8. Use the arrow keys to select Socket Configuration and press Enter to access the Socket Configuration screen, as shown in Figure 4-7.

    Figure 4-7 Socket Configuration screen

  9. Use arrow keys to select IIO Configuration and press Enter to access the IIO Configuration screen, as shown in Figure 4-8.

    Figure 4-8 IIO Configuration screen

  10. Use arrow keys to select Intel(R) TV for Directed I/O (TV-d) and press Enter to access the Intel(R) TV for Directed I/O (TV-d) screen, as shown in Figure 4-9.

    Set Intel(R) TV for Directed I/O (TV-d) to Enabled. Press Esc to exit the screen.

    Figure 4-9 Intel(R) TV for Directed I/O (TV-d) screen

Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 12016

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next