No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei IN200 NIC User Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Command List

Command List

Table 6-1 lists the major commands and their functions supported by hinicadm.

Table 6-1 List of major commands

Major Command

Function

Remarks

version

Queries version information.

-

info

Queries the system device list or the basic information about a specified device.

-

log

Obtains online logs and parses offline logs.

-

updatefw

Upgrades and activates the firmware.

-

counter

Collects statistics.

-

table

Prints linear table information.

-

mac

Queries the fixed MAC address.

-

fec

Queries and sets the Forward Error Correction (FEC) mode of a specified port.

-

rate

Queries and sets the port rate limit.

-

temperature

Queries the chip temperature and optical module temperature.

-

event

Queries asynchronous event statistics.

-

clear

Clears statistics.

-

qos

Queries and Sets the User Priority and CGE Pause Time

For Linux only

reg

Queries the device register information.

-

autoneg

Queries and sets the auto negotiation mode.

-

nic_queue

Queries the rx/tx queue information of a device.

-

mode

Queries and sets the device work mode.

-

hilink_param

Queries the ctle, ffe, and dfe parameters.

-

fe_epc

Obtains Fusion Engine (FE) error information.

-

hilink_dump

Queries information about the hilink register.

-

hilink_port

Queries port information.

-

hilink_count

Queries hilink statistics information.

-

hilink_speed

Queries and sets the rate of a port.

-

bp

Queries chip back pressure information.

The ARM versions of the following OSs are not supported:
  • SLES 15/12.3/12.4
  • RHEL 7.4/7.5/7.6
  • CentOS 7.4/7.5/7.6
  • EulerOS V2.0 SP8 ARM
  • NeoKylin Server V5.0U5/V7.0U5/V7.0U6
NOTE:
  • These commands are used only by developers for troubleshooting and do not affect your use of the hinicadm tool.
  • These commands can be used only after the iommu (for an x86 version) or Smmu (for an ARM version) parameter is enabled in the SR-IOV pass-through mode. For details, see Configuring SR-IOV.

dp

Queries statistics on chip data path modules.

cpb

Queries the usage of chip CPB cells.

tile_io

Queries the status of microcode threads.

csr_rd

Reads the chip register.

csr_wr

Writes the chip register.

csr_dump

Reads and saves chip register values in batches.

pdm

Queries the CPB CELL resource allocation and current resource usage.

fm_show

Queries the interrupt information reported by a hardware module

-

sriov

Queries and sets the PF virtualization control status.

-

self_adaption

Queries and sets the port auto-adaptation mode.

-

serdes

Queries port serdes information.

-

sfp

Queries optical module information.

-

reset

Restores factory settings.

-

lro

Queries and Sets the LRO Coalesce Time

-

xstats

Queries the statistics of received and sent packets of a NIC port

for Windows only

inter_coal

Queries and sets the interrupt coalescence parameters

sdi_mode

Queries and Sets the SDI Card Mode

for Linux only

sdi_cfg

Queries and Sets the SDI Configuration

roce_port_traffic

Queries the real-time traffic sent and received by each port of a NIC where a RoCE device is located.

-

reboot_notice

Sets NIC Packet Data to Be Sent and Triggering NIC Packet Sending When AC Power Is Lost

for ARM versions of Linux only

dcb

Queries and sets the DCB function.

Currently, QoS can be configured only in Linux.

pfc

Queries and sets the PFC function.

ets

Queries and sets the ETS function.

Translation
Download
Updated: 2019-07-30

Document ID: EDOC1100063073

Views: 8093

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next