No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei IN200 NIC User Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using hinicadm

Using hinicadm

Command Format

The hinicadm supports the following command format:

hinicadm <major cmd> <minor cmd> <parameter> …<minor cmd> <parameter>

The command function is determined by the major command (major cmd) and minor commands (minor cmd).

On Microsoft Windows, you cannot double-click hinicadm.exe to use to the tool. The following describes how to use the commands on Microsoft Windows:
  1. Run cmd to open the command line interface (CLI), right-click the title bar and choose Properties from the menu, click the Layout tab, and set Width under Screen Buffer Size to 999 to ensure that the command output format is correct.
  2. Go to the tool installation directory, for example, C:\Program Files (x86)\hinicadm.
  3. Enter hinicadm.exe<major cmd> <minor cmd> <parameter> …<minor cmd> <parameter>.

Obtaining Help Information

When using the hinicadm tool, you can use the following commands to obtain help information:

  • Obtaining the tool version information

    Short command: hinicadm -v

    Long command: hinicadm --v

  • Obtaining the list of major commands supported by the tool

    Short command: hinicadm -h

    Long command: hinicadm --help

  • Obtaining the list of minor commands supported by the tool

    Short command: hinicadm <major cmd> -h

    Long command: hinicadm <major cmd> --help

    In addition, you can add -h to any major command to obtain the value ranges of all minor commands and the parameters in the commands.

Updated: 2019-07-30

Document ID: EDOC1100063073

Views: 8094

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next