No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

The IN200 Ethernet NIC (IN200 for short) is a PCIe card for Huawei servers. It supports external service ports.

The following table shows the IN200 series NICs with different number of ports and different port speeds:

NIC Name

Port Description

SP570/SP580

Four 25G SFP28 optical ports

SP572

Two 100G QSFP28 optical ports

SP582

Two 25G SFP28 optical ports

The IN200 is a PCIe card based on the Huawei HiSilicon Hi1822 NIC chip. It supports PCIe 3.0 x16 Gen3.0 (SP570/SP580/SP572), PCIe x8 Gen3.0 (SP582) and Inter-integrated Circuit (I2C) channel, and Management Component Transport Protocol (MCTP) out-of-band management. Figure 1-1, Figure 1-2, and Figure 1-3 show the architecture of the IN200.

Figure 1-1 SP570/SP580 architecture
Figure 1-2 SP572 architecture
Figure 1-3 SP582 architecture
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 12075

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next