No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Flow Control

Configuring Flow Control

Prerequisites

  • The RoCE driver package of the IN200 NIC has been installed.
  • The VLAN has been configured.

Procedure

To configure QoS, perform the following procedure:

  1. Configure the Data Center Bridging (DCB). Use the hinicadm management tool. For command details, see Querying and Setting the DCB Function (dcb).
  2. Configure PFC. Use the hinicadm management tool. For command details, see Querying and Setting the PFC Function (pfc).
  3. Configure ETS. Use the hinicadm management tool. For command details, see Setting the ETS Function (ets).
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 9474

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next