No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei IN200 NIC User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the iBMC WebUI

Logging In to the iBMC WebUI

This topic describes how to log in to the iBMC WebUI.

  1. Configure the login environment.

    1. Connect the PC to the iBMC management network port using a network cable.
    2. Set an IP address for the PC, and ensure that the IP address is on the same network segment as that of the iBMC management network port.

      For example, set the IP address to and the subnet mask to

  2. Log in to the iBMC WebUI.

    1. Open a browser, enter https://IP address of the iBMC management network port in the address box, and press Enter.
      Figure 9-1 iBMC login page
    2. On the iBMC login page, perform the following operations:
      • Select the language to be used.
      • Enter the user name.
      • Enter the password.
      • Set Domain to This iBMC.
      • Click Log In.

        The iBMC WebUI home page is displayed.

Updated: 2019-11-19

Document ID: EDOC1100063073

Views: 9332

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next