Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an ECS Test Network
Prerequisites
- A CSDR instance has been successfully applied for.
- Status of the service instance is Normal.
- An ECS has been successfully added.
Procedure
- Log in to the ManageOne as a VDC administrator or VDC operator using a browser.
URL in the non-B2B scenario: https://Address for accessing the ManageOne Console page. For example, https://console.demo.com.
URL in the B2B scenario: https://Address used by VDC users to access the ManageOne tenant plane. For example, https://tenant.demo.com.
- Select your region and then project from the drop-down list on the top menu bar.
- Choose
- Click
next to a service instance.
- Click Configure NIC in the row where the ECS to be queried resides.
- On the Configure NIC page, click
in the Test NIC area on the right of the test network adapter to be configured.
- Click OK.
next to a service instance.
in the Test NIC area on the right of the test network adapter to be configured.
