Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Automatic Service Recovery
Under automatic recovery, if data or applications in data center A (production center) become unavailable due to disasters or faults, services are automatically recovered in data center B (DR center).
After CSHA is deployed using FusionCloud Deploy, manual recovery is used by default. To automatically rectify the fault, run the sh configFailoverMode.sh command to change the fault recovery mode. For details, see Selecting an Execution Mode for Fault Recovery in FusionCloud 6.3.1.1 Command Reference.
In automatic recovery mode, manual operations are not supported.
