Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the Path After a Single Storage Device Is Recovered
When a storage device is faulty (for example, all links are interrupted or the device management network is faulty), a HyperMetro volume is mounted (a VM is migrated, or a VM HA switchover occurs due to a physical server failure).After the fault of the storage device is rectified, only the mapping of a single storage device is established on the new host. After the faulty storage device is recovered, the mapping is not performed. As a result, only one path is available for storage.
Prerequisites
- You have obtained the eReplication login address, account, and the password from the administrator.
- You have obtained the account and the password of the ManageOne OM plane from the administrator.
Procedure
- Log in to the DeviceManager of production storage using a browser.
- Login address: https://IP address of DeviceManager of storage:8088.
- Default username: admin, default password: Admin@storage.
- In the navigation tree on the right, click Data Protection.
- Click Remote Device.
- Check Health Status and Running Status of remote device.
- When the Health Status is Normal, and the Running Status is Link up, go to Step 5.
- Otherwise, please wait for the status changed to normal and link up, go to Step 5.
- Log in to the ManageOne OM plane using a browser, click eReplication under to log in to eReplication.
- URL: https://Address for the homepage of the ManageOne OM plane:31943. For example: https://oc.type.com:31943.
- Default username: admin, default password: Huawei12#$.
If the login fails, use the following login address and eReplication account and password to log in to eReplication.
- Login address: https://floating IP address of the management plane of eReplication:9443/src/login/view/login.html.
- The default account is admin, and password is Admin@123.
- In the navigation bar, choose Protection > FusionSphere VM.
- Select the service instance to be remapped and click More > Remapping on the right.
- The Information dialog box is displayed. Click OK.
- Click
in the upper right corner of the page to view background tasks.
If Succeeded is displayed in the Status column, the path has been restored.
in the upper right corner of the page to view background tasks.
