Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appendix
- Configuring an ECS Test Network
- Manually Restoring a Specified Backup Service
- Restarting Microservices
This section uses MODriverFrameworkService as an example to describe how to restart the microservice. - Configuring Service Monitoring in the DR Center
This section describes how to configure service monitoring in the DR center after the DR switchover. - Configuring the LVS Node IP Address in the DR Center
After the DR switchover occurs, you need to log in to the ManageOne OM plane in the DR center and reconfigure the LVS node IP address of the ManageOne OM plane in the DR center. - Configuring the Backup Policy
- DR Configuration
- Manual Reprotection
- How to Check Whether VLUN of the ECS Protected by the VHA Service Instance Has Multiple Links
- Failed to Log In to the DR ECS Running CentOS/Red Hat/Oracle Linux Remotely Using SSH after Planned Migration/Fault Rectification in the CSDR/CSHA Scenario
