No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Software Installation Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes how to install FusionCloud 6.3.1.1 using FusionCloud Deploy.

Intended Audience

This document is intended for:

  • Software installation engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

03

2019-04-20

This issue is the third official release.

  • Add FusionStorageOBS7.0.
  • Modify the version number of FusionCloud Deploy.

02

2019-03-08

This issue is the second official release.

  • Modify the version number of FusionCloud Deploy.
  • Update the parameter description based on the modified parameter information displayed on FusionCloud Deploy.

01

2019-01-26

This issue is the first official release.

Translation
Download
Updated: 2019-04-23

Document ID: EDOC1100063246

Views: 8837

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next