No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Database Services

Installing Database Services

This section describes how to install MySQL and Redis database services required by ManageOne using a database template.

Prerequisites

The Deploy services have been installed. For details, see Installing Deploy Services.

Procedure

  1. Choose Deployment > Feature Deployment > Software from the main menu.
  2. In the search box in the upper right corner of the Software page, select All, enter MOCustom, and press Enter.
  3. Click in the Operation column corresponding to the MOCustom software package.
  4. Set parameters on the Configure deployment info tab page.

    Table 26-21 Parameter description

    Parameter

    Value

    Name

    The name must be unique in the system. For example, the name can be MOCustom/MOC.

    Owner

    system

    Region

    Set this parameter to the value of RegionID in environment planning in Obtaining Environment Planning Information. For example, the value can be cn-global-1.

    Stage

    Product

    Region alias

    Set this parameter to the value of regionAlias in environment planning in Obtaining Environment Planning Information. For example, the value can be MOC.

    Template

    Select mo_admin_global_db to deploy the database on the OM plane.

  5. Click Next.
  6. Click OK and wait until the task is complete.
  7. Repeat 2 through 6 to install the IAM database. The name must be unique. Select iam_global_db for Template.
  8. Repeat 2 through 6 to install the database on the operation plane. The name must be unique. Select mo_tenant_global_db for Template.
  9. Determine whether to deploy the log center service database based on the site requirements.

    • If the FusionCloud solution is used and the log center service needs to be installed, the log center service database needs to be deployed.

      If the log center service does not need to be installed, do not perform this step.

    • If the NFVI solution is used, the log center service database needs to be installed.

    If the log center service database needs to be deployed, repeat 2 through 6. The name must be unique. Select mo_logcenter_global_db for Template.

    If any service fails to be installed, install the service again as instructed in How Do I Reinstall a Service Instance Failed to be Installed?

Translation
Download
Updated: 2019-08-16

Document ID: EDOC1100063248

Views: 25143

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next