No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying a VM Configuration File

Modifying a VM Configuration File

This section describes how to modify a VM configuration file to ensure that services are running properly and subsequent configurations can be properly delivered.

Procedure

  1. Use PuTTY to log in to each ManageOne node as the sopuser user.

    The default password of the sopuser user is D4I$awOD7k.

  2. Run the following command to switch to the root user:

    su - root

    The default password is Changeme_123.

  3. Run the following command to change the VM port range:

    bash /tmp/conf_port.sh

    When the system displays config port parameter successful, the VM port range has been changed.

  4. Use PuTTY to log in to any O&M node as user root.

    NOTE:

    You can log in to the ManageOne deployment plane and choose Resource > Server to view the IP address of the O&M node.

  5. Run the following command to open the sudoers file:

    vi /etc/sudoers

  6. Add the following information at the end of the sudoers file to grant permissions on the file to user ossadm:

    ossadm ALL=(root) NOPASSWD:/usr/bin/systemctl

  7. Press Esc and run the :wq! command to save the file and exit.
  8. Log in to all O&M nodes, operation nodes, database nodes, IAM nodes, and log center nodes separately, and repeat 5 to 7 to modify the sudoers configuration file.
  9. Use PuTTY to log in to any O&M node as user root.
  10. Run the following commands to start services:

    su - ossadm

    /opt/oss/manager/agent/bin/ipmc_adm -cmd stopapp

    /opt/oss/manager/agent/bin/ipmc_adm -cmd startapp

  11. Log in to all O&M nodes and operation nodes, separately, and repeat 10 to start services.

    NOTE:

    You can log in to the ManageOne deployment plane and choose Resource > Server to view the IP addresses of the operation nodes.

Translation
Download
Updated: 2019-06-10

Document ID: EDOC1100063248

Views: 22920

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next