No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Use FileZilla to Transfer Files?

How Do I Use FileZilla to Transfer Files?

This section describes how to use FileZilla to upload software packages or files. FileZilla 3.3.5.1 is used as an example.

Procedure

  1. Decompress FileZilla.zip on your local PC.
  2. Double-click FileZilla.exe to start this tool.
  3. In the upper left area of the FileZilla window, click .
  4. In the lower left area of the Site Manager dialog box, click New Site.
  5. On the General tab page, set the site parameters listed in Table 26-23.

    Table 26-23 Parameters in the Site Manager dialog box

    Parameter

    Description

    Host

    IP address of the server

    Port

    22

    Server type

    SFTP

    Logon type

    Normal

    User

    sopuser

    Password

    Password of user sopuser

    NOTE:

    After operating system hardening is performed, you cannot log in to the server as users root and ossadm in SFTP mode. Instead, you can log in to the server only as user sopuser.

  6. Click Connect.
  7. In the Unknown Host Key dialog box, select the Always trust this host, add this key to the cache check box and click OK.
  8. In the Remote site area, set the destination directory on the server.

    After you set the directory, all files stored in the directory are displayed in the Remote site area.

  9. In the Local site area, set the source directory on the PC.

    After you set the directory, the Local site area displays all files stored in this directory.

  10. Perform the following operations as required.

    If You Need To...

    Procedure

    Uploading files

    In the Local site area, right-click the file to be uploaded and choose Upload from the shortcut menu.

    Download files

    In the Remote site area, right-click the file to be downloaded and choose Download from the shortcut menu.

    NOTE:

    You can click the Successful transfers or Failed transfers tab to view the upload details. If the upload or download fails, click the Failed transfers tab in the lower left area of the FileZilla window. Then, right-click the file that failed to transfer and choose Reset and requeue selected files from the shortcut menu to resume the file transfer.

Translation
Download
Updated: 2019-06-10

Document ID: EDOC1100063248

Views: 23128

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next