No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Deploy Services

Installing Deploy Services

This section describes how to install Deploy services (basic services), such as the database switchover.

Prerequisites

You have logged in to the service deployment system.

Procedure

  1. Check the node status.

    1. Choose Resource > Server from the main menu.

      The Server page is displayed.

    2. Check the status of the Deploy node in the server list.
      • If the node status is displayed as , go to 2.
      • If the node status is displayed as , contact technical support for assistance.
        NOTE:

        The Deploy nodes are regionAlias-ManageOne-Deploy01 and regionAlias-ManageOne-Deploy02 nodes.

  2. Choose Deployment > Feature Deployment > Software from the main menu.
  3. In the search box in the upper right corner of the Software page, select All, enter ManageOne, and press Enter.

    NOTE:

    If no software package is displayed, click Scan in the upper left corner of the Software page and then search for the software package again. If the issue persists, upload the software package and then click Scan. For details about uploading a software package, see operations in section How Do I Upload and Scan the Software Package?

  4. Click in the Operation column that contains the ManageOne-6.3.X software package.

    NOTE:

    In this document, software package names are examples only. Replace them with actual package names.

  5. Set parameters on the Configure deployment info tab page as described in Table 26-6.

    Table 26-6 Parameter description

    Parameter

    Value

    Owner

    system

    Region

    Set this parameter to the value of RegionID in environment planning in Obtaining Environment Planning Information. For example, the value can be cn-global-1.

    Stage

    Product

    Region alias

    Set this parameter to the value of regionAlias in environment planning in Obtaining Environment Planning Information. For example, the value can be MOC.

    Feature set

    Select Manager-HA-Deploy.

  6. Set the installation parameters. Table 26-7 describes these parameters.

    Table 26-7 Parameter description

    No.

    Parameter

    Description

    Example Value

    1

    Bus.useTLSv1Protocol

    Specifies whether the TLSv1.0 and TLSv1.1 protocols can be used during SSL handshake.

    • true: TLSv1.0, TLSv1.1, and TLSv1.2 can be used during SSL handshake.
    • false: Only TLSv1.2 can be used during SSL handshake.
    NOTICE:

    The TLSv1.0 protocol has security risks. You are advised to use secure protocols by setting this parameter to false.

    false

    2

    DBHA.ServerGroup

    Used for database switchover. Set this parameter to regionAlias-OM-Global-Deploy.

    NOTE:

    The value of this parameter must be manually entered.

    MOC-OM-Global-Deploy

    3

    Cert_Validity_Days

    Specifies the certificate validity period. The unit is day.

    7300

    4

    FEBS_LOCAL_MAINTAIN_MODE

    Specifies whether the local maintenance mode is used.

    1

    5

    ER.useXForwardedIPAddr

    Specifies whether the service deployment system is accessed using a proxy.

    false

    6

    RunAsUser

    Specifies the running user of the services on the OM plane. Set this parameter to ossadm.

    ossadm

    7

    ServiceClass

    Specifies the run plane of the services on the OM plane. Set this parameter to MANAGER.

    MANAGER

  7. Click Next.
  8. Click OK and wait until the task is complete.
  9. Repeat 2 through 4.
  10. Set parameters on the Configure deployment info tab page as described in Table 26-8.

    Table 26-8 Parameter description

    Parameter

    Value

    Owner

    system

    Region

    Set this parameter to the value of RegionID in environment planning in Obtaining Environment Planning Information. For example, the value can be cn-global-1.

    Stage

    Product

    Region alias

    Set this parameter to the value of regionAlias in environment planning in Obtaining Environment Planning Information. For example, the value can be MOC.

    Feature set

    Select Manager-HA.

  11. Set the installation parameters. Table 26-9 describes these parameters.

    Table 26-9 Parameter description

    No.

    Parameter

    Description

    Example Value

    1

    MGGlobalAccessLBAddress

    Indicates the floating IP address of the Deploy nodes.

    10.31.32.53

  12. Click Next.
  13. Click OK and wait until the task is complete.
  14. During the installation, you will be forcibly logged out of the web client of the service deployment system. You need to log in to the service deployment system after the installation.

    Enter https://Floating IP address of the Deploy nodes:31943/ in the address box of a browser to log in to the service deployment system.

    NOTE:
    • The default user name for logging in to the service deployment system is admin, and the default password is Changeme_123.
    • If you fail to log in to the service deployment system, wait for 5 minutes and try again.
    • After the login, change the password as prompted.
    • Change the password periodically (for example, every three months or six months) to protect the password from security risks, such as force cracking.

  15. Choose Deployment > Feature Deployment > Services from the main menu.
  16. On the Service page, check the instance deployment status.

    • If the instance deployment status is displayed as , the service has been installed successfully and the service process has been started.
    • If the instance deployment status is displayed as , the service has failed to be installed. In this case, install the service again as instructed in How Do I Reinstall a Service Instance Failed to be Installed?

Translation
Download
Updated: 2019-08-16

Document ID: EDOC1100063248

Views: 25033

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next