No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionCloud Troubleshooting Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Time Zone

Changing the Time Zone

Before the system time is synchronized with the NTP clock source, ensure that the time zone of the VM meets the live network plan. If the time zone is different from the planned one, perform the operations provided in this section to change the time zone.


  1. Log in to the regionAlias-ManageOne-Deploy01 node as the sopuser user in SSH mode.

    The default password is D4I$awOD7k.

  2. Run the following command to switch to the root user:

    su - root

    The default password is Changeme_123.

  3. Run the following command to view the time zone of the current VM:

    ls -l /etc/localtime

    Information similar to the following is displayed:

    lrwxrwxrwx. 1 root root 32 Dec  6 17:37 /etc/localtime -> /usr/share/zoneinfo/Asia/Beijing

    Check whether the time zone included in the previous command output is the same as that planned on the live network.

    • If it is, go to 5.
    • If it is not, go to 4.

  4. Run the following commands to change the time zone of the current VM:

    rm -f /etc/localtime

    ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime

    Replace Asia/Shanghai with the planned time zone. You can query the default time zone of the OS under the /usr/share/zoneinfo directory.

  5. Repeat 1 through 4 to view and change the time zones of all VMs.

Updated: 2019-06-10

Document ID: EDOC1100063248

Views: 23323

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next