No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Clear the VM Environment?

How Do I Clear the VM Environment?

This section describes how to clear the VM environment.

Procedure

  1. Go to the /clear directory in the ManageOne_init_tools folder on your local PC.
  2. Double-click the iplist.txt file and replace the IP addresses in the file with the IP addresses of the VMs whose environment needs to be cleared. Do not enter spaces before or after an IP address.
  3. Clear VM processes.

    1. Double-click the start_clear.bat script.
    2. When the following information is displayed, enter the default password and press Enter:
      Input the default password for all nodes:
      NOTE:

      The default password is Changeme_123.

    3. If the message "Press any key to continue..." is displayed, the clearing is successful.

  4. Clear disk partition data.

    1. Double-click the start_clear_disk.bat script.
    2. When the following information is displayed, enter the default password and press Enter:
      Input the default password for all nodes:
      NOTE:

      The default password is Changeme_123.

    3. When the following information is displayed, enter the data disk name obtained in 2 in section Performing the Preinstallation Check and press Enter.
      Input data device name[/dev/xvde]:
    4. If the message "Press any key to continue..." is displayed, the clearing is successful.

Translation
Download
Updated: 2019-06-10

Document ID: EDOC1100063248

Views: 22860

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next