No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1.1 Troubleshooting Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Determine the Active and Standby Nodes of the Deployment System

Determine the Active and Standby Nodes of the Deployment System

Application Scenario

This section describes how to determine the active and standby nodes of the deployment system.

Procedure

  1. Use PuTTY to separately log in to the regionAlias-ManageOne-Deploy01 and regionAlias-ManageOne-Deploy02 nodes in SSH mode.

    Default account: sopuser; default password: D4I$awOD7k

  2. Run the following command to switch to the root user:

    su - root

    Default password: Changeme_123

    Password: Password of the root user

  3. Run the following command to identify the active and standby nodes:

    [ -f /opt/oss/manager/var/share/standby_flag_file ] && echo "The current Node is standby Node."

    If the following command output is displayed, the node is the standby node. If no command output is displayed, the node is the active node.

    The current Node is standby Node.

Translation
Download
Updated: 2019-06-10

Document ID: EDOC1100063248

Views: 22594

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next