No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SmartKit V2R5C00RC9 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes how to add devices that you want to maintain and manage on the Devices page, and how to modify, remove, or update the added devices.

For details about the Devices user interface and description about functional areas of SmartKit installed on mid-range or entry-level storage arrays, see Figure 3-2 and Table 3-5. The Devices user interface is not supported in SmartKit running on the SVP of high-end storage devices. When you log in to SmartKit, the system automatically obtains devices.

Figure 3-2 Devices page
Table 3-5 Functions of the Devices page

Functional Area



Operation bar: enables you to add, modify, remove, update, and import devices.


Function pane: shows details about devices that are added.

Updated: 2019-02-01

Document ID: EDOC1100064211

Views: 5029

Downloads: 142

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next