display ap provision
Usage Guidelines
After you set parameters for an AP to go online in the AP view, you can run this command to view the detailed configuration.
Example
# Display configurations in the AP provisioning view.
<AC6605> display ap provision ap-id 2 -------------------------------------------------------------------------------- AP name : 70d9-313c-3120 AP group : default AP address mode : static IPv4 address : - IPv4 mask address : - IPv4 gateway address : - IPv4 AC list : - IPv6 address : 2001:db8::100 IPv6 prefix length : 32 IPv6 gateway address : 2001:db8::1 IPv6 AC list : 2001:db8:1::1 2001:db8:2::1 2001:db8:3::1 2001:db8:4::1 --------------------------------------------------------------------------------
Item |
Description |
|---|---|
AP name |
AP name. To configure this parameter, run the ap-name (AP view) command. |
AP group |
AP group to which an AP belongs. To configure this parameter, run the ap-group (AP view) command. |
AP address mode |
Mode in which an AP obtains an IP address. To configure this parameter, run the address-mode (AP view) command. |
IPv4 address |
Static IPv4 address of an AP. To configure this parameter, run the ip-address (AP view) command. |
IPv4 mask address |
Static IPv4 mask of an AP. To configure this parameter, run the ip-address (AP view) command. |
IPv4 gateway address |
IPv4 gateway address of an AP. To configure this parameter, run the ip-address (AP view) command. |
IPv4 AC list |
AC IPv4 address list for APs. To configure this parameter, run the ac-list (AP view) command. |
IPv6 address |
Static IPv6 address of an AP. To configure this parameter, run the ipv6-address (AP view) command. |
IPv6 prefix length |
Static IPv6 mask of an AP. To configure this parameter, run the ipv6-address (AP view) command. |
IPv6 gateway address |
IPv6 gateway address of an AP. To configure this parameter, run the ipv6-address (AP view) command. |
IPv6 AC list |
AC IPv6 address list for APs. To configure this parameter, run the ac-list ipv6(AP view) command. |
