Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pki built-in-ca match-rsa-key
Function
The pki built-in-ca match-rsa-key command configures a device to search for the RSA key pair associated with a specific SSL decryption certificate.
Parameters
| Parameter | Description | Value |
|---|---|---|
| file-name | Specifies the name of an SSL decryption certificate. | It must be the name of an existing SSL decryption certificate. |
Usage Guidelines
Usage Scenario
Run this command to view the RSA key pair associated with an SSL decryption certificate. Then the system searches all local RSA key pairs for the desired one, and displays the key pair name.
Prerequisites
An SSL decryption certificate has been generated using the pki generate built-in-ca certificate command or an SSL decryption certificate has been imported.
Example
# Configure a device to search for the RSA key pair that matches certificate file rsakey_builtinca.cer.
<AC6605> system-view [AC6605] pki generate built-in-ca certificate rsa-key-pair rsakey entity entity1 Please enter the file name for built in CA certificate <length 1-64> : rsakey_builtinca.cer Info: Generate built in CA certificate successfully. [AC6605] pki built-in-ca match-rsa-key certificate-filename rsakey_builtinca.cer Info: The file rsakey_builtinca.cer contains certificates 1. Info: Certificate 1 from file rsakey_builtinca.cer matches RSA key rsakey.
Related Topics
