Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs-server traffic-unit
Function
The hwtacacs-server traffic-unit command sets the traffic unit used by an HWTACACS server.
The undo hwtacacs-server traffic-unit command restores the default traffic unit used by the HWTACACS server.
By default, the traffic unit is byte on the device.
Format
hwtacacs-server traffic-unit { byte | kbyte | mbyte | gbyte }
undo hwtacacs-server traffic-unit
Usage Guidelines
Usage Scenario
Different HWTACACS servers may use different traffic units; therefore, you need to set the traffic unit for each HWTACACS server group on the device and the traffic unit must be the same as that on the HWTACACS server.
Precautions
You can modify this configuration only when the HWTACACS server template is not in use.
