poe max-power
Function
The poe max-power command sets the maximum output power of a device.
The undo poe max-power command restores the maximum output power of a device to the default value.
By default, the maximum output power of the device is the total power that the PoE power supply provides for PDs. Therefore, the configured maximum output power must be smaller than the total power that the PoE power supply provides for PDs.
Usage Guidelines
Usage Scenarios
By default, the system automatically obtains the maximum PoE power supported by the device. You can run the poe max-power command to set the maximum output power to ensure stable PoE power supply when the total power of the device is insufficient.
Precautions
If the maximum output power that you set is smaller than the total power required by PDs, PDs with lower priority are powered off or cannot be powered on manually.
display poe-power
