Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wireless-access-specification configuration
Function
The display wireless-access-specification configuration command displays the configuration of reporting WLAN access site information.
Usage Guidelines
After the device is configured to report WLAN access site information, you can run the display wireless-access-specification configuration command to view the configuration.
Example
# Display the configuration of reporting WLAN access site information.
<AC6605> display wireless-access-specification configuration
------------------------------------------------------------
Source IP :
Report server : -
------------------------------------------------------------
Table 26-51 Description of the display wireless-access-specification configuration command output
Item |
Description |
|---|---|
Source IP |
Source IP address of the report server. To configure this parameter, run the wireless-access-specification report command. |
Report server |
Name of the bound report server profile. To configure this parameter, run the report-server command. |
