eapol-start dest-address transform-condition
Function
The eapol-start dest-address transform-condition command specifies the EAPOL-start packets to be encapsulated by an AP.
The undo eapol-start dest-address transform-condition command restores the default settings.
By default, an AP encapsulates only the EAPOL-start packets with the destination MAC addresses being the AP's BSSID.
Format
eapol-start dest-address transform-condition { always | equal-bssid }
undo eapol-start dest-address transform-condition
Usage Guidelines
Usage Scenario
The destination MAC addresses of the EAPOL-start packets sent by some STAs are APs' BSSIDs, but the destination MAC addresses of the EAPOL-start packets sent by other STAs are not APs' BSSIDs. You need to run this command to specify the EAPOL-start packets to be encapsulated.
Precautions
The packet types specified by the eapol-start dest-address transform-condition and eapol-start dest-address transform-to commands must be the same.
