Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display bgp error
Usage Guidelines
Usage Scenario
When a BGP fault occurs, run the display bgp error command to display BGP error information. BGP error information includes peer error information, route error information, and resource threshold-crossing error information.
Precautions
If no BGP fault occurs, no information is displayed after running the display bgp error command.
Example
# Display BGP errors.
<AC6605> display bgp error
Error Type : Peer Error
Date/Time : 2010/03/22 11:40:39
Peer Address : 10.1.1.2
VRF Name : Public
Error Info : Router-ID conflict
Error Type : Peer Error
Date/Time : 2010/03/22 11:40:39
Peer Address : 10.1.1.2
VRF Name : Public
Error Info : Incorrect remote AS
Error Type : Route Error
AddressFamily : IPv4-UNC
InstanceID : 0
Discard count : 20
Error Type : Resource exceed limit
Date/Time : 2010/03/22 11:40:39
Limit info : Route number limit
Error Type : Resource exceed limit
Date/Time : 2010/03/22 11:40:39
Limit info : Label number limit
Table 6-278 Description of the display bgp error command output
Item |
Description |
|---|---|
Error Type |
Error type:
|
Date/Time |
Date and Time when an error occurs |
Peer Address |
Address of a peer |
VRF Name |
VPN Instance name |
Error Info |
Error information:
|
AddressFamily |
Address family |
Discard count |
Number of discarded routes |
Limit info |
Information indicating that resources exceed the limit:
|
