Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
probe-response-retry
Parameters
| Parameter | Description | Value |
|---|---|---|
| retry-time | Specifies the number of times Probe Response packets are retransmitted. | The value is an integer that ranges from 0 to 3. When the value is set to 0, Probe Response packets are not retransmitted. |
Usage Guidelines
Usage Scenario
In high-density wireless scenarios, too many Probe Response frames occupy a large number of wireless resources. To reduce wireless resource occupation of the frames, you can run the probe-response-retry command to set a small number of or forbid Probe Response packet retransmissions.
Precautions
A small number of Probe Response packet retransmissions may reduce the channel scan efficiency of some STAs while a large number of Probe Response packet retransmissions may lower the wireless network performance.
Related Topics
