undo ap
Parameters
Parameter |
Description |
Value |
|---|---|---|
ap-name ap-name |
Deletes the AP with the specified AP name. |
The AP name must exist. |
ap-id ap-list |
Deletes APs with the specified IDs in a batch. |
The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) or hyphens (-) to separate AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20. |
ap-mac ap-mac |
Deletes the AP with the specified MAC address. |
The AP's MAC address must exist. |
ap-group group-name |
Deletes the AP in a specified AP group. |
The AP group must exist. |
all |
Deletes all APs. |
- |
Usage Guidelines
Application Scenario
If you do not want a specified AP to go online on the AC, run the command to delete the AP from the AC. After the AP is deleted, the AP goes offline from the AC.
Configuration Impact
Deleting an AP will interrupt services of STAs connected to the AP.
Precautions
If an AP is upgraded, in standby state, or the ap-ping command is executed, the AP cannot be deleted.
