Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ac-list ipv6(AP view)
Parameters
| Parameter | Description | Value |
|---|---|---|
| ipv6-address | Specifies the IPv6 address of an AC. | The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X. |
Usage Guidelines
Use Scenario
You can run this command to configure an AC IPv6 address list for APs. After this list is configured, the APs can unicast a Discovery Request packet to discover an AC when they go online using IPv6 addresses.
Precautions
After the configuration is delivered, restart the APs to make the configuration take effect.
Example
# Set the AC's IPv6 address to fc00::2 in AP provisioning view.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] ap-id 0 [AC6605-wlan-ap-0] ac-list ipv6 fc00::2 Warning: The incorrect configuration will cause the AP to go out of management. This operation will deliver parameter setting and ma y cause reboot of AP(s). Continue?[Y/N]:y
