reboot
Parameters
| Parameter | Description | Value |
|---|---|---|
| fast | Fast restarts the device. In fast restart mode, the configuration file is not saved. | - |
Usage Guidelines
Usage Scenario
This command functions in the same way as a power recycle operation (power off and then restart the device). The command enables you to restart the device remotely.
After the reboot command is run, if the current configuration is modified, the system displays a message asking you whether to save the configuration before a restart.
Info: The system is comparing the configuration, please wait................ Warning: All the configuration will be saved to the next startup configuration. Continue ? [y/n]: Y
After the reboot fast command is run, the system restarts quickly without displaying any message and the configuration is lost.
- After the reboot fast command is run, the system displays the following message:
Info: system is sync data now, please wait ...
The message indicates that the system is synchronizing internal data.
Precautions
If you do not respond to the displayed message within the timeout period after running this command, the system will return to the user view and the device will not be restarted.
This command interrupts services on the entire device. Therefore, do not use this command when the device is running properly.
Before restarting the device, ensure that the configuration file has been saved.
- Do not power off the device during the restart.
